Wednesday, June 6, 2012

Check Engine Light ON?

While driving Check Engine light came up on dash.Its ON and not blinking or flashing and not turning OFF.


When the Check Engine light comes on, this is the on-board computer's way of telling you it sees a problem in one of the monitored systems. Unfortunately, there are literally 100's of parts and sensors monitored in various systems, and to take a "guess" as to which part/sensor in which system is faulty, is virtually impossible. However, if you are not experiencing any drivability issues such as skipping, stalling, shifting problems, etc, then more than likely, the problem is going to lie in the EVAP (emissions) system. Very commonly, this could be a faulty, loose or missing fuel cap or even putting fuel in while the vehicle is running. Check the cap for any cracks in the rubber o-ring on the underside. Check the fuel filler neck for any signs of chips or debris. Check under the vehicle, around the area of the fuel tank and the EVAP canister looking for any vacuum lines that have dry-rot cracks, holes or loose/missing connections. If these all check out, then the best thing to do at this point is to have the "p-codes" read from the on-board computer. These p-codes are what is used as a "starting point" for the diagnosis and will tell which part/sensor in which system has the fault. There isn't a Mechanic on the planet that can tell you what is wrong with the vehicle just by "looking" at the Engine Light. Every single Mechanic's first course of action WILL be to obtain the p-codes. Once you get these p-codes you can more accurately and efficiently diagnose the problem and then make the repair. You can have these p-codes read FREE (except in California) at any local "big chain" part store (ie. AutoZone, PepBoys, Advanced, etc). If you still need help after retrieving the codes, you can bring them here, and any of our Techs can walk you through the diagnostic procedure, and then even help you make the repair if you feel confident enough to try.

If you'd like to clear the Check Engine light without finding out "why" it is on, you can remove the "NEG" cable from the battery for 15 minutes. Keep in mind, if the reason why the light is on was not addressed, or repaired incorrectly, the light WILL return within 50-75 miles of normal city/highway driving.

This details will help.
Thanks.


Users Who Viewed This Problem Also Viewed:



OBD Code is cleared but check engine light will not RESET?

http://schematicsdiagram.blogspot.in/2012/02/obd-code-is-cleared-but-check-engine.html


How to Read Codes from Check Engine Light?

http://schematicsdiagram.blogspot.com/2011/12/how-to-read-codes-from-check-engine.html


Check engine light with codes P2195 and P2197?

http://howtobyme.blogspot.in/2012/01/check-engine-light-with-codes-p2195-and.html


Car Runs Fine But Check Engine light is ON?

http://whatisbyme.blogspot.in/2012/05/car-runs-fine-but-check-engine-light-is.html

1991 Toyota Trecel: Engine Starts fine but dies when gets Warm?

http://whatisbyme.blogspot.in/2012/05/1991-toyota-trecel-engine-starts-fine.html


1999 Toyota Tacoma: Check Engine Light Read Code P0171?

http://whatisbyme.blogspot.in/2012/05/1999-toyota-tacoma-check-engine-light.html


2007 Toyota Highlander Hybrid: Yellow Check Engine Light ON dash?

http://whatisbyme.blogspot.in/2012/05/2007-toyota-highlander-hybrid-yellow.html


Check power-train message with orange engine light came on?

http://howtobyme.blogspot.in/2012/02/check-power-train-message-with-orange.html




Car jerks while going uphill and Check engine light is ON?

                         

Toyota Camry Check engine light flashes while driving?





For All types of Car models and brands help 
Go to Newly Launched

FREE Car repair guide? 
http://technoanswers.blogspot.in/2012/03/car-repair-guide.html 

& 
Complete Car repair Help FREE? 
http://repairhelpcenter.blogspot.in/2012/03/complete-car-repair-help.html


No comments:

Post a Comment